Smart Glass Technologies
Knowledge Center

Smart Glass Warranty: What Is Covered and For How Long | Smart Glass Tech US | Smart Glass Technologies

Smart Glass Warranty: What Is Covered and For How Long | Smart Glass Tech US | Smart Glass Technologies

Understanding Your Smart Glass Warranty

A smart glass warranty is more than a duration printed on a proposal. For an architect specifying a glazed partition, a contractor coordinating electrical work, or a homeowner planning a privacy shower, the important questions are practical: Which part of the system is covered? Who evaluates a problem? What happens if the glass works but the controls do not?

Smart Glass Technologies (Smart Glass Tech US) provides written warranty terms with every quote. The stated periods are 3 years for PriWatt™ Glass, 2 years for PriWatt™ Film, and 1 year for installation. These are separate warranty categories, not interchangeable promises of coverage for every component or service.

The company's main differentiator is its full turnkey installation service, rather than a DIY kit model. Laser templating, custom fabrication in Miami, certified installation crews, low-voltage wiring, busbar concealment, and automation integration are coordinated as part of the project. That coordination matters when specifying the system and when understanding responsibility after installation.

How Long Does the Warranty Last?

Start by identifying whether your project uses smart film applied to existing glazing or a manufactured smart glass assembly. Then review the installation warranty separately. The table below summarizes the published periods; the written terms supplied with your quote define the actual coverage.

Warranty categoryStated periodWhat to confirm in writing
PriWatt Glass3 yearsCovered product conditions, applicable assembly, remedies, and exclusions
PriWatt Film2 yearsCovered film conditions, approved application, remedies, and exclusions
Installation1 yearCovered workmanship, service responsibilities, and claim procedures

Do not assume that a product warranty automatically includes removal, replacement labor, transportation, access equipment, or restoration of adjacent finishes. Those obligations need to be established in the written terms. Likewise, confirm the event that starts each warranty period rather than assuming it is the order date, installation date, or project handover.

Review the warranty information alongside your project-specific quote. If a contract, finish schedule, or owner requirement calls for something different, resolve that discrepancy before procurement.

What Does a Smart Glass Warranty Cover?

The verified warranty periods establish duration, but duration alone does not establish the full scope of protection. The written terms should identify the covered conditions, eligibility requirements, exclusions, and available remedies. Avoid treating broad phrases such as “full warranty” as a substitute for those details.

Product coverage

For film, ask how the terms address switching performance, adhesion concerns, appearance changes, and electrical connection issues. For glass, ask how they address switching performance and the relevant laminated or insulating glass assembly. These are subjects to clarify, not a statement that every such condition is covered.

PriWatt Smart Film and PriWatt Smart Glass use PDLC technology and are frosted when off. PriWatt Reverse Smart Film and PriWatt Reverse Smart Glass use PNLC technology and are clear when off. Your warranty documents and operating instructions should identify the exact product, so its intended off-state is not mistaken for a fault. See how smart glass works for background.

Installation coverage

The installation warranty has its own 1-year period. Ask the quote to distinguish workmanship responsibilities from product responsibilities, particularly around wiring, edge details, busbar concealment, and the connections between trades. A symptom at the finished glass surface may require evaluation before its cause can be assigned.

Controls and automation

Automation integration adds another coordination point. Smart Glass Tech US integrates with Lutron, Crestron, and Control4, but integration capability does not mean every third-party device carries the PriWatt product warranty. Confirm responsibility for supplied controls, programming, power components, and changes made by other service providers.

Why Turnkey Installation Matters to Warranty Planning

Smart glazing sits at the intersection of glazing, electrical work, interior finishes, and controls. When those scopes are purchased independently, an owner may have to coordinate several parties to determine where an issue originates. A well-documented turnkey scope makes those interfaces easier to understand from the beginning.

Smart Glass Tech US is headquartered in Miami, Florida, with manufacturing there and products made in the USA. Founded in 2018, the company has installed 200,000+ sq ft and has local installers across 26+ US metros. It is UL and SGCC certified. These credentials provide company context; they do not replace the project-specific warranty terms.

The practical advantage is the coordinated delivery process. Laser templating establishes the opening geometry, custom fabrication addresses the specified configuration, and certified crews carry out installation. Low-voltage wiring, concealed busbars, and automation integration can be considered together instead of left as unresolved details between suppliers.

Turnkey service should still be paired with clear documentation. Ask who receives a service request, how the initial assessment is handled, and which responsibilities remain with the owner or other contractors. Check the local service area during planning rather than assuming a particular response time.

Confirm That the Application Matches the Specification

A warranty review should reflect the actual setting. An office partition, a shower door, and a skylight present different detailing and access questions. Smart Glass Tech US offers formats including doors, windows, room dividers, curved glass, railings, and rear projection, but the appropriate product and installation approach must be established for each project.

Showers and moisture-exposed locations

For a shower application, ask the team to confirm the suitable product, edge treatment, electrical detailing, and care instructions. Do not assume that a film specified for an interior office partition is automatically appropriate for the same exposure as a shower enclosure.

Skylights and difficult-access glazing

For overhead or difficult-access locations, discuss how future inspection or service would be performed. Confirm whether access-related costs are addressed by the warranty or remain a separate project consideration. This is especially important where surrounding finishes could complicate removal.

Doors and frequently handled surfaces

Moving doors require coordination of hardware, wiring routes, and adjacent finishes. Ask how later hardware adjustments or alterations by other trades could affect warranty eligibility. Review the available smart glass formats with the installation team before finalizing details.

Buyer Checklist: What to Obtain Before Approval

Use this checklist during proposal review. It helps design professionals compare scopes and gives owners a clearer record of what they are buying.

  • Exact product identification: Record film or glass, standard or reverse operation, and the specified assembly.
  • Separate warranty periods: Identify the product period and the installation period independently.
  • Start date: Obtain written confirmation of when each warranty begins.
  • Coverage and exclusions: Request definitions of covered conditions and circumstances that may affect eligibility.
  • Available remedy: Clarify whether an accepted claim involves repair, replacement, or another stated remedy.
  • Associated costs: Confirm treatment of labor, shipping, access, removal, and adjacent finish restoration.
  • Controls responsibility: Identify who supports power components, automation programming, and third-party devices.
  • Care requirements: Obtain approved cleaning and maintenance instructions for the installed product.
  • Claims process: Record the service contact and required supporting documentation.
  • Later changes: Ask about alterations, property transfers, and work by other contractors.

Compare these answers alongside the installation scope, not just the material price. The smart glass cost guide can help frame budget discussions, while the written quote establishes the proposed project responsibilities.

What to Do If You Notice a Problem

Keep the quote, warranty terms, product identification, and handover instructions accessible. If something changes in operation or appearance, document the affected location, what you observe, and whether the issue is constant or intermittent. Photos or a short video can help communicate the symptom without attempting a diagnosis.

Contact the designated service team before removing film, opening electrical components, or arranging modifications. Describe any recent cleaning, hardware work, or automation changes. These details can help the team distinguish a product concern from a control, installation, or site-related issue.

A reported symptom does not by itself establish a covered claim. Evaluation and the applicable written terms determine the next step. Clear records and an identified service contact make that conversation more productive.

Choose Clear Terms and Coordinated Installation

The strongest purchasing decision combines the right product, a coordinated installation scope, and warranty terms you understand before work begins. PriWatt Glass carries a 3-year warranty, PriWatt Film carries a 2-year warranty, and installation carries a 1-year warranty, with written terms supplied with every quote.

For a turnkey proposal that addresses fabrication, installation, wiring, and controls together, request pricing from Smart Glass Tech US.

Frequently Asked Questions

How long is the PriWatt smart glass warranty?

PriWatt Glass has a 3-year warranty, PriWatt Film has a 2-year warranty, and installation has a 1-year warranty. Written terms are provided with every quote and define coverage, exclusions, and claim procedures.

Does the product warranty include replacement installation labor?

Do not assume that it does. Product and installation warranties are separate categories. Confirm in the written terms how removal, replacement labor, shipping, access equipment, and adjacent finishes are handled.

Are automation controls covered by the smart glass warranty?

Smart Glass Tech US integrates with Lutron, Crestron, and Control4, but that does not establish warranty coverage for every third-party component. Ask your quote to identify responsibilities for controls, power components, and programming.

When does the warranty period begin?

Confirm the start event in the written warranty terms supplied with your quote. Do not assume the period begins at ordering, installation, or project handover.

What should I do if my smart glass stops switching correctly?

Document the affected location and symptoms, gather your quote and warranty documents, and contact the designated service team. Avoid removing film, opening electrical components, or making modifications before receiving guidance.

Turnkey installation · Nationwide

Start with your project.

From first measurement to final switch-on, work with the Smart Glass Tech US team.

Get an estimate