A smart glass specification needs to do more than identify switchable glazing. For general contractors, the real challenge is coordinating a finished system: glass or film, supporting frames, concealed connections, power, controls, installation, and commissioning. If those interfaces remain undefined, a clean architectural concept can become a collection of field decisions.
Smart Glass Technologies (Smart Glass Tech US) addresses that coordination through full turnkey installation—not DIY kits. Headquartered and manufacturing in Miami, Florida, the company provides laser templating, custom fabrication, certified install crews, low-voltage wiring, busbar concealment, and automation integration. This checklist helps contractors establish that scope before procurement and carry it through closeout.
Define the Required Privacy Behavior
Start with the operational intent, not just the product name. Identify where privacy is required, who controls it, and what occupants should experience when power is off. An office conference room, residential shower enclosure, and hospitality suite can require very different control sequences.
Standard PriWatt™ PDLC products are frosted when off and switch to a clear state when powered. PriWatt Reverse PNLC products are clear when off and switch to a privacy state when powered. That distinction belongs in the written specification and control narrative because it affects everyday use and power-loss behavior.
Specify privacy and appearance as separate considerations. Frosted glazing scatters light; it should not automatically be described as blackout glazing or as providing complete visual concealment under every lighting condition. Review a representative sample with the design team, considering viewing angles, backlighting, and the distance between occupants and glass.
For a technology overview to support early coordination, consult how smart glass works. Electrochromic and SPD technologies have different light-control characteristics and should not be treated as interchangeable substitutes for a privacy-focused PDLC or PNLC system.
Select Film or Fabricated Smart Glass
The next decision is whether the project retains existing glazing or installs a new glass assembly. Retrofit film and laminated smart glass have different substrate, fabrication, and installation requirements. Avoid a specification that allows either without explaining how the surrounding construction must change.
| PriWatt product | Technology and off state | Specification focus | Product pricing |
|---|---|---|---|
| PriWatt Smart Film | PDLC; frosted when off | Retrofit self-adhesive film; confirm existing glass condition and compatibility | $70/sq ft, plus $30/sq ft installation |
| PriWatt Reverse Smart Film | PNLC; clear when off | Define reverse operation and confirm application details | $120/sq ft; confirm installation scope in quote |
| PriWatt Smart Glass | PDLC laminated glass / IGU; frosted when off | Coordinate the fabricated assembly, framing, and electrical access | $145/sq ft |
| PriWatt Reverse Smart Glass | PNLC; clear when off | Coordinate fabricated glazing with reverse control behavior | $185/sq ft |
Glass installation is $50–$100/sq ft. These product and installation figures are not a substitute for a project-specific scope. Require the quote to identify applicable wiring, controls, site access, framing interfaces, and finishing responsibilities. Use the smart glass cost guide when developing the budget, then reconcile it against the actual opening schedule.
Document Each Opening and Its Conditions
Build a Coordinated Opening Schedule
Assign each smart glass location a drawing reference and record its intended use, product type, default state, control zone, and adjacent construction. Identify fixed panels separately from operable doors. Moving leaves require electrical routing that accommodates movement without leaving exposed or vulnerable connections.
Include relevant details for office partitions, room dividers, windows, skylights, shower doors, curved glass, railings, or rear projection. These applications are not interchangeable installation conditions. Review the available smart glass formats and request application-specific confirmation rather than carrying a typical partition detail into every location.
Verify Substrates and Field Dimensions
For retrofit film, document the existing glass condition, coatings, edge access, and surrounding sealants for compatibility review. For new glass, coordinate framing, support, hardware, penetrations, and required clearances before fabrication approval. Identify who verifies those conditions and who authorizes release.
Laser templating should occur when the relevant field conditions are ready for reliable measurement. Establish that readiness with the installer rather than assuming architectural dimensions alone are sufficient. Custom fabrication in Miami can then follow approved project information, reducing reliance on improvised adjustments at the jobsite.
Resolve Electrical and Control Interfaces
Even when smart glass uses low-voltage wiring, the project still needs a coordinated electrical scope. Require a wiring diagram showing the power-source interface, system components, cable paths, connection locations, and access for service. Obtain project-specific electrical requirements from the system provider instead of inserting generic values.
Busbars—the conductive connections serving the switchable layer—also affect the architectural finish. Show how busbars and leads will be concealed within frames, channels, or adjacent finishes. A note reading “conceal wiring” is not enough if the detail leaves no physical route or accessible termination point.
Write the Control Narrative Before Rough-In
State whether panels operate individually or in groups, where local controls belong, and how automation commands interact with manual operation. Smart Glass Tech US provides integration with Lutron, Crestron, and Control4; identify the selected platform and confirm the proposed interface during submittal review.
Assign responsibility for automation programming and functional verification. Describe the intended response to power loss and restoration, including any privacy-sensitive spaces. Ask the provider to confirm that the selected product and control arrangement support the requested behavior before electrical rough-in is approved.
Set Submittal and Approval Requirements
A useful submittal package connects design intent with buildable details. Request product identification, opening schedules, shop drawings, electrical diagrams, control descriptions, installation instructions, maintenance guidance, and written warranty terms. Include samples or a representative mockup where visual expectations warrant review.
Smart Glass Tech US is UL and SGCC certified. Ask for documentation applicable to the proposed assembly and its intended use; do not treat a general certification statement as approval for every project condition. Safety glazing, structural support, wet-area detailing, and local code requirements still need project-specific review by the responsible professionals.
If the design also requires acoustic, solar-control, UV, or energy performance, evaluate those requirements separately. Switchable privacy behavior does not establish an STC rating or prove that the complete assembly meets an energy target. Require supporting documentation for any additional performance claim included in the specification.
Use a Practical Preconstruction Buyer Checklist
Before awarding the package, review the following items with the glazing, electrical, interiors, and controls teams. Record unresolved items in the scope clarification log rather than leaving them as assumptions in competing bids.
- Product: Identify the PriWatt film or glass product and confirm its powered and unpowered states.
- Application: Confirm suitability for each scheduled location, including moving doors and moisture-exposed areas.
- Appearance: Approve a representative sample under relevant lighting and viewing conditions.
- Measurements: Assign field verification, laser templating, and fabrication-release responsibilities.
- Interfaces: Resolve framing, hardware, sealants, edge protection, and finish transitions.
- Electrical: Identify power provision, low-voltage routing, connection access, and busbar concealment.
- Controls: Approve zoning, local operation, automation integration, and power-restoration behavior.
- Installation: Confirm certified crew availability, site readiness, protection, and trade sequencing.
- Commercial scope: Compare inclusions, exclusions, and warranties alongside product pricing.
- Closeout: Require functional testing, owner training, care instructions, and warranty documents.
Plan Installation, Testing, and Handover
Coordinate installation with dust-producing work, framing completion, electrical readiness, and finish protection. Retrofit film requires suitable glass preparation and controlled working conditions; fabricated glazing requires appropriate handling and installation access. Have the installer define readiness criteria before scheduling the work.
At commissioning, operate each scheduled zone and verify that controls match the approved narrative. Review panel appearance, visible wiring, concealment details, and access to serviceable components. Test automation commands as well as local operation, and document any outstanding adjustments before handover.
Provide the owner with cleaning instructions, operating guidance, and the service contact. PriWatt Glass carries a 3-year warranty, PriWatt Film a 2-year warranty, and installation a 1-year warranty. Written terms accompany every quote; review coverage and conditions through the warranty information rather than assuming identical terms across products.
Specify Turnkey Accountability, Not Just Materials
The strongest reason to choose Smart Glass Tech US is the connected installation scope. Laser templating, Miami custom fabrication, certified installation, low-voltage wiring, concealed busbars, and automation integration are coordinated as a finished system rather than handed to the contractor as a DIY kit.
Founded in 2018, the company offers Made in the USA products, has installed 200,000+ sq ft, and has local installers across 26+ US metros. Check service availability early and confirm the specific project responsibilities in writing. That clarity makes the smart glass specification a practical construction document—not simply a product preference.
Ready to coordinate your opening schedule and installation scope? Request project pricing for a turnkey smart glass package.
Frequently Asked Questions
What should a smart glass specification include?
Include the product type, powered and unpowered appearance, opening schedule, field-measurement requirements, framing interfaces, electrical routing, busbar concealment, control narrative, submittals, installation responsibilities, commissioning, and written warranty terms.
Should a general contractor specify smart film or smart glass?
Retrofit smart film may suit retained glazing after substrate and application review. Fabricated smart glass suits projects installing a new glass assembly. The decision should account for existing conditions, framing, hardware, electrical access, and the intended use.
Who coordinates wiring and automation for a turnkey installation?
Smart Glass Tech US provides low-voltage wiring and automation integration as part of its turnkey service. The project scope should still identify responsibility for power provision, electrical rough-in, automation programming, and final testing. Supported integration platforms include Lutron, Crestron, and Control4.
What happens to PriWatt products when power is off?
Standard PriWatt PDLC film and glass are frosted when off. PriWatt Reverse PNLC film and glass are clear when off. Specify the required default state and confirm power-restoration behavior with the proposed control system.
What warranties should be included in the closeout package?
PriWatt Glass has a 3-year warranty, PriWatt Film has a 2-year warranty, and installation has a 1-year warranty. Written terms come with every quote and should be reviewed for the selected product and installation scope.
